Stump Removal and Stump Grinding in High Point, North Carolina
Trimming trees is a difficult task for most. Removing stumps is even more difficult. Unlike tree trimming that takes only one time, removal of the tree stump takes some time and requires adherence to established techniques to make the process easier and faster to complete.
Most owners in High Point, NC prefer to remove stumps as they occupy a beautiful space and avoid the construction or installation of structures. They are also monsters, even if vegetation grows in them. The biggest problem though is that they are dangerous and can cause injury, especially if they are hidden under the foliage.
Most stump removal methods must be performed by professionals, especially when equipment is used, as it is with stump grinding. Take a look at four common techniques.
By Hand
Manually removing stumps only works with small, old or rotten stumps. You will need a chain saw, a lifting rod, a pickup, an ax, the length of the chain and a four-wheel drive vehicle. For this, we also have a wood chipper service.
The use of unsuitable tools makes the operation useless or halfway. Keep in mind that the tree stump is not alive, but its roots extend over a long distance, making it difficult to give it up. What needs to be done then is to cut the head and exposed roots with an ax or a chainsaw. The leverage can be achieved with the collecting material and the grave bar.
When the roots separate, they dissolve to facilitate uprooting. The chain is tied tightly around the stump and connected to the vehicle that pulls it.
Grind
Stump grinding is a popular removal technique, but fans should not give it a try. The equipment can be rented if you do not want to hire professional help.
As with hand technique, the roots should be removed while removing stones and other obstacles. A chainsaw is used to cut the stump further, to facilitate grinding and to shorten the time.
The operation of the mill will be difficult for the fans, so it is a good idea that someone from the landlord demonstrates the process. Professional workers charge between $ 100 and $ 200 for sanding and transporting the stump.
When burning
Burning is an economical method of tree stump removal and a common technique used in regions that do not have access to stump crushers.
With this method, the stump can not be switched on easily. The holes are drilled and filled with potassium nitrate. Water is poured into the holes to dissolve the chemical and wood waste is added to the tree stump before being ignited.
Drill holes and burn the inside of the stump so that the entire part burns well. The remains are removed and the vegetation can grow over the area if the construction or installation of structures is not immediately required.
Buy Chemical Products
Chemical elimination is another inexpensive technique. The stump, however, takes time to break.
Potassium nitrate is filled into holes that are not drilled into the stump but around it. Water is poured into the holes and the mixture is allowed to stand for about a month or more, depending on the state of decomposition of the stump. The waiting period ends when the stump becomes spongy and can be broken with an ax.
Call Us
Feel free to call our contact number 336-923-7212. We offer free quotes on all tree service!